|
Why
People Choose CL Free Digital Pool Water Systems
CL Free Water Systems
Pool/Spa System sanitizes and protects your pool water and gives you a
chlorine and salt free swimming experience. The system eliminates
chlorine, chemicals and other impurities from your water. As it freshens
and sanitizes your water, the system also kills and protects your water
from bacteria and algae by adding copper ions and oxidizing carbon based
impurities in the water with titanium created OH. The CL Free Water
Systems Pool/Spa System significantly reduces the calcium build up in
the pool equipment and along the pool and spa water lines.
1. The power settings for the Oxidation and Ionization
functions are independent. This provides
flexibility and total control. Other units tie both sets of functions to
each other providing no flexibility or independent control.
2. Oxidation and Ionization functions can be energized at the
same time. Other units make you
manually select and switch between which functions/plates are energized.
3. LED's flash at different frequencies to indicate that the
corresponding functions have been
activated and at what power level. Faster flash means higher power.
4. LED's alternate colour (red and
green) to indicate that the polarity of the functions/plates has been
switched. This swap balances the copper plate usage and helps keep the
plates clean.
5. Copper Ionization has a built-in start up setting (to
quickly bring your pool/spa up to the
desired copper level) and 8 different maintenance settings (to maintain
the desired copper level). If the system is run nonstop, after 24 hours
it resets itself and begins its daily cycle again.
With CL Free’s Automated PH controller, you get
all the above plus…
6. Based on the Controller pH setting, the pH sensor
determines if pH adjustment should be made or not. As pH reduction is
needed, co2 is injected in metered, controlled regular intervals.
7. Your pool/spa's pH is displayed every 30 seconds on the
controller's readout.
8. pH calibration is a snap. Push the calibrate button 2
seconds, enter the pool's actual pH, press the button again, you're
done.
9. The system consists of a CL Free
Systems Oxidation Chamber with titanium and copper plates,
Pool/Spa controller, pH sensor, Flow Meter Controlled co2 Regulator, and
UL approved power supply and wiring harness. |
